Builders Metalwork

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

This 30mm wide and tall and 15mm wide light duty angle bracket by Expamet is a L shape bracket for timber connections. Use 4.0x40 Annular Ring Shank Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Brackets must be used...

JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of the carrying joist or wrapped over the top for higher...

Debonding sleeve for use on plain-ended wall ties at vertical movement joints. Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

This light duty Expamet Angle bracket (AB604060) is thin L shape bracket that is 40mm tall and 60mm long and designed for timber connections. Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. ...

This 150 x 90mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (21) 9mm (4) 11mm (1) 11x30 Slot (2) . Brackets must be...

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (20) 9mm (6) 11x30 Slot (2). Brackets must be used in...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall...

A screw-in tie supplied with a Nylon 8mm plug for joining new masonry to existing walls without the need for jointing, perfect for conservatories, extensions and garden walls. Simple and easy to install, this starter tie is suitable for use in brickwork...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

The UK’s most popular solution to the tying-in of new walls to existing masonry walls/columns. The only system with “snap out” ties which can be positioned anywhere along the channel for a universal fit. The C2K Crocodile Wall Starter is a quality...

JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of the carrying joist or wrapped over the top for higher...

This galvanised mild steel Hip Iron is designed to provide decorative restraints to prevent ridged tile movement on hipped roofs. Where a ridge comes down at an angle, the iron is nailed to the joist before bedding the final tile, to prevent any slippage.

Various fixing holes for convenience, 3.75 x 30mm Square Twisted Sherardized / Galvanised Nails or M6 threaded fasteners. The fixing holes on this fixing band are 6.25 / 3.8mm. This product is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015...

AB1006060 is a light duty L Shape Angle bracket timber connections. Fixing type is suitable for substrate and 5mm (20) 11mm (3) hole size. Brackets must be used in pairs to prevent eccentric loading. Use 4.0x40 Annular Ring Shank Nails to achieve...

AB12512542 is a light duty L shape Expamet Angle bracket for timber connections. Fixing type is suitable for substrate and 4mm (16) hole size. Brackets must be used in pairs to prevent eccentric loading.

This light duty AB15015063 Expamet Angle bracket is a thin L shape bracket for timber connections. Fixing type is suitable for substrate and hole size using products for 4mm (20) 9mm (6) 11x30 Slot (2) fixing hole dimensions. Brackets must be used in...

Light duty 150mm long by 90mm tall Expamet Angle bracket is a thin L shape bracket for timber connections. Fixing type is suitable for substrate and hole size, hole sizes are 4mm (21) 9mm (4) 11mm (1) 11x30 Slot (2) for convenience. Brackets must be used...

This light duty Expamet Angle bracket AB404040 is an L shape bracket that is 40mm tall, wide, and long and is used for timber connections. Use 4.0x40 Annular Ring Shank Nails to achieve stated loads, otherwise as suitable for substrate and hole size. ...

This light duty Expamet Angle bracket is a thin L shape bracket that is 50mm tall and 50mm long, designed for timber connections. The hole dimensions are 4mm (9) and 8mm (1) for convenience.