null

Builders Metalwork

Builders metalwork includes the key fixings required for most construction projects, including joist hangers, restraint straps, timber connectors, truss clips and joist struts. Made from galvanised steel, they’re available in a variety of sizes to suit any requirements, and can be ordered online for home delivery or to click and collect from your local Howarth Timber branch.

Filters

Check local branch stock

  • SPHS.jpg.jpeg 2_SPHS.jpg.jpeg

    Expamet Masonry Single Piece Joist Hanger 200 x 47mm (SPSH20047)

    This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...
  • SPHS.jpg.jpeg 2_SPHS.jpg.jpeg

    Expamet Masonry Single Piece Joist Hanger 200 x 75mm (SPSH20075)

    This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...
  • SPHS.jpg.jpeg 2_SPHS.jpg.jpeg

    Expamet Masonry Single Piece Joist Hanger 225 x 100mm (SPSH225100)

    This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...
  • SPHS.jpg.jpeg 2_SPHS.jpg.jpeg

    Expamet Masonry Single Piece Joist Hanger 225 x 150mm (SPSH225150)

    This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...
  • SPHS.jpg.jpeg 2_SPHS.jpg.jpeg

    Expamet Masonry Single Piece Joist Hanger 225 x 47mm (SPSH22547)

    This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...
  • SPHS.jpg.jpeg 2_SPHS.jpg.jpeg

    Expamet Masonry Single Piece Joist Hanger 225 x 75mm (SPSH22575)

    This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

Builders Metalwork

Our range of builders metalwork products provide reinforcement for strong structural support. Timber connector plates give added strength to timber joints, and pre-drilled nail plates connect timbers on both sides.

Newsletter Sign Up