Builders Metalwork

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

Debonding sleeve for use on plain-ended wall ties at vertical movement joints. Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.

Designed to fix brickwork or blockwork to timber-based structures up to a height of 15m. An example about be attaching a timber door or window frames directly to brickwork. The ties are screwed horizontally into the frame, surrounded by mortar and built...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

A screw-in tie supplied with a Nylon 8mm plug for joining new masonry to existing walls without the need for jointing, perfect for conservatories, extensions and garden walls. Simple and easy to install, this starter tie is suitable for use in brickwork...

The red Staifix Universal Insulation Retaining Clip (Uni) will fit all the standard stainless steel ties including HRT4 and RT2, in order to retain insulation to the inner leaf of the cavity wall.

Manufactured from cement that has been reinforced with glass fibre, the Mesh Spacer Triple Cover is designed to offer the same levels of strength and durability as concrete. The Spacer should be used vertically allowing the concrete to flow easily,...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (20) 9mm (6) 11x30 Slot (2). Brackets must be used in...

All nail holes must be filled, Nail plates should be used on both sides of the joint to prevent eccentric loading. Ensure plate is located cenrally over joint. Fixing type is 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails.

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

This galvanised Heavy Duty (horizontal) Restraint Strap features 150mm bent element. It also features 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists...

This galvanised Heavy Duty (horizontal) Restraint Strap featuring a Twist. This metalwork also features 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists...

Expamet Engineering Heavy Duty Restraint Straps are the ideal choice for building projects when new walls or floors need to be created, long-lasting galvanised steel straps will help anchor structures during your next build. These Expamet straps can be...

Choose the Expamet Herringbone joist structs for a faster to install alternative to timber noggins. Fixing type is 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails with 3.8mm Fixing Hole Dimensions. Fix with 1 nail per end, using the fixing hole...

This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...