Builders Metalwork

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A reinforcing bar, AKA Rebar is used to help concrete stand tension force, although the concrete is strong enough by nature to withstand compression force, it can also crack from load bending tensile force, which is where rebars come in. This product is...

This 90 x 90mm Angle Bracket has a wing of length of 59mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (16) 9mm (4) 11mm (1) 11x30 Slot (1). Brackets must be used...

All nail holes must be filled, Nail plates should be used on both sides of the joint to prevent eccentric loading. Ensure plate is located cenrally over joint. Fixing type is 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails.

All nail holes must be filled, Nail plates should be used on both sides of the joint to prevent eccentric loading. Ensure plate is located cenrally over joint. Fixing type is 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails.

This light duty Expamet Angle bracket is a thin L shape bracket that is 50mm tall and 50mm long, designed for timber connections. The hole dimensions are 4mm (9) and 8mm (1) for convenience.

This 30mm wide and tall and 15mm wide light duty angle bracket by Expamet is a L shape bracket for timber connections. Use 4.0x40 Annular Ring Shank Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Brackets must be used...

The Truss Clip by Expamet comes in either 38mm or 47mm, both manufactured from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It can be affixed using 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails using 3.8mm fixing hole dimensions. All nail...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

This light duty Expamet Angle bracket (AB604060) is thin L shape bracket that is 40mm tall and 60mm long and designed for timber connections. Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. ...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

This light duty Expamet Angle bracket AB404040 is an L shape bracket that is 40mm tall, wide, and long and is used for timber connections. Use 4.0x40 Annular Ring Shank Nails to achieve stated loads, otherwise as suitable for substrate and hole size. ...

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

Made from Stainless Steel this Expanet wall tie features a 'turn-n-slide tie' to accommodate all sizes of brick/block. To suit wall thickness from 60mm up to 250mm. Create a rapid connection of a new all to existing without the need for cutting out and...

This 150 x 90mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (21) 9mm (4) 11mm (1) 11x30 Slot (2) . Brackets must be...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

Debonding sleeve for use on plain-ended wall ties at vertical movement joints. Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

A screw-in tie supplied with a Nylon 8mm plug for joining new masonry to existing walls without the need for jointing, perfect for conservatories, extensions and garden walls. Simple and easy to install, this starter tie is suitable for use in brickwork...

The Truss Clip by Expamet comes in either 38mm or 47mm, both manufactured from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It can be affixed using 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails using 3.8mm fixing hole dimensions. All nail...

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (20) 9mm (6) 11x30 Slot (2). Brackets must be used in...