Builders Metalwork

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (20) 9mm (6) 11x30 Slot (2). Brackets must be used in...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

Various fixing holes for convenience, 3.75 x 30mm Square Twisted Sherardized / Galvanised Nails or M6 threaded fasteners. The fixing holes on this fixing band are 6.25 / 3.8mm. This product is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015...

The UK’s most popular solution to the tying-in of new walls to existing masonry walls/columns. The only system with “snap out” ties which can be positioned anywhere along the channel for a universal fit. The C2K Crocodile Wall Starter is a quality...

Manufactured from cement that has been reinforced with glass fibre, the Mesh Spacer Triple Cover is designed to offer the same levels of strength and durability as concrete. The Spacer should be used vertically allowing the concrete to flow easily,...

Type 3 Wall Tie designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. These Double Triangle wall ties are suitable for use in external walls of houses and small commercial...

Type 3 Wall Tie designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. These Double Triangle wall ties are suitable for use in external walls of houses and small commercial...

Type 3 Wall Tie designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. These Double Triangle wall ties are suitable for use in external walls of houses and small commercial...

Designed to fix brickwork or blockwork to timber-based structures up to a height of 15m. An example about be attaching a timber door or window frames directly to brickwork. The ties are screwed horizontally into the frame, surrounded by mortar and built...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of