The ACO Closing End Cap is suitable for use with channels from both the RainDrain and HexDrain ranges. Ideal for domestic use and light traffic applications, the End Cap is certified to Load Class A15. Its purpose is to 'finish off' a run of channels, so...

HexDrain / RainDrain outlet end cap 110mm

The 1m ACO RainDrain is manufactured from Vienite, ACO's high-strength polymer concrete and features cast iron grating that is certified to Load Class B125 and is suitable for use in areas with pedestrian traffic or light vehicle traffic such as private...

The 1m ACO RainDrain Channel is manufactured using Vienite, ACO's high-strength polymer concrete and features galvanised steel grating and is certified to load class A15. It is suitable for use in paved pedestrian areas, as well as areas that experience...

The Aco RainDrain Sump Unit is a lightweight channel drainagesystem used for surface water drainage in a domestic and light duty traffic situation. Suitbale for pedestrian areas and domestic drives due to its galvanised steel grating.

This Manhole Cover and Recessed Frame is a cost-effective choice that is ideal for areas that are likely to experience little traffic. The pressed steel pattern top is designed to prevent water from pooling on the surface, whilst the double seal design...

Wreckin Galvanised Pavior Type Square to Round Manhole Cover and Frame is designed to fit around round-shaped openings to manholes without the requirement to cut the cover to fit the area. It rotates easily so that it can be aligned to the natural...

Our 6" Pendant Lighting Set is perfect for adding a functionality to your home. The set includes a pre-packed, 6" ceiling rose, T2 lampholder and flexi.

These 13 amp British fuses are perfect for use with most electronics, appliances and electrical equipment. They come in a pack of 4 and are extremely convenient to have around the house or workplace.

This 1 Gang Dry Lining Box is designed for electrical socket, it is suitable for plastering in the wall at any time. It is easy to install, can be fixed to the wall by screw nails with or without plasterboard.

Iko Pro Stickall 310ml is a bituminous sealing glue that is dense and suitable for use in all weather as it adheres to most building surfaces even if they are wet. Stickall offers excellent adhesive strength and is resistant to sagging in high...

We supply a wide range of Lead Roll which is an excellent choice of metal for roofing applications, as it is soft, yet strong and incredibly durable; especially compared to other metals that may be harder but are not as strong or easy to mould as lead is.

The Cure It Roofing Kit 12m2 is a complete GRP roofing kit that is suitable for small areas such as walkways and balconies that are up to 12m square in size. The kit includes everything that you will need including the 12m square Reinforcement Mat roll...

This product is a Drip Fascia Trim for C1, C2 and C4 Corners for the Cure It system. This particular product is 3000mm in length. Perfect for gutters and other roof edge applications

Cure It Drip Fascia Trim A200 is designed to drip and discharge water away from the structure of your home. The flexible profile fits over uneven surfaces and helps corner trims sit directly on the fascia board.

Fitted to roof edges, the A200 heavy duty GRP trim is compatible with C1, C2, and C4 corner trims. This product provides drainage into the gutter for extra protection against water damage. It is flexible for uneven surfaces and easy to install.

The Cure It Drip Fascia Trim A250 is fitted to roof edges to allow drainage into gutter. It's compatible with C1, C2 and C4 corner trims and comes in a 3000mm length.

If you're looking to install a GRP waterproofing system, this Kit contains all the tools needed to successfully carry out the installation. The Paddle Rollers ensure that the reinforcement mat is properly saturated whilst removing air bubbles from the...

AT195 external angle trim has a high adhesion finish on the outer face for step details, gutter floors or cover flashings etc. Manufactured from aluminium extrusion with a high tensile strength and rigidity, it has an anti-corrosion coating that is UV...

AT195 internal angle trim is ideal for use in roofing applications where the internal ties are exposed to the weather. This product has a high adhesion surface on the inner face for forming upstands, gutter floors etc. This can be used with all of our...

Cure It Raised Edge Trim B230 3000mm is a cold applied, free from the risks associated with hot works, will withstand foot traffic as standard and is UV resistant. This roof trims meets all of your needs for a warm roof specification. There are no seams,...

B230 heavy duty raised edge GRP trim provides a flat edge detail to prevent water run off. The unique high-bond finish makes this trim flexible for uneven surfaces, or can be used on sloping roofs. Drip matches A170 and is available in a variety of...

The Cure It Raised Edge Trim B260 3000mm is a glass reinforced polyester roofing materials manufacturer that offers a complete range of materials specially formulated for roofing applications. These materials are cold applied- free from the risks...

Cure It B260 Heavy Duty Raised Edge Trim provides flat roof edge detail to prevent water run off. Unique high-bond finish. Designed for use with roofing resin and topcoat- no delamination. Flexible for uneven surfaces. Pre-pigmented