Check local branch stock
-
![STIXWE%20-%20PCR.jpg.jpeg]( "STIXWE%20-%20PCR.jpg.jpeg")
Everbuild Stixall Crystall Clear 290ml (STIXCLEAR)
Everbuild Stixall Extreme Power is the ultimate combined building adhesive and sealant, based on hybrid polymer technology, with the most Extreme power to both bond and seal virtually EVERYTHING to ANYTHING in nearly all conditions, even under water or...
Sealants & Adhesives
Grab adhesives
Ideal for strong, instant bonding without the need for nails or screws:
Perfect for flexible, waterproof sealing:
- Bathroom sealants
- Exterior silicone
- Weatherproof sealants
- Expanding foam
Used for filling gaps and insulation:
- Gap-filling foam
- Insulation foam
Specialist adhesives & sealants
Designed for specific materials and applications:
- Wood adhesives
- Masonry sealants
- High-temperature sealants
Choosing the right sealant or adhesive
When selecting sealants and adhesives, consider:
- Application – bonding, sealing, or gap filling
- Environment – interior or exterior use
- Water resistance – essential for bathrooms and outdoor areas
- Material compatibility – wood, metal, masonry, or plastic
Complete your project
You may also need:
If you are working on a new project or renovating an existing outdoor space, pop into your local Howarth branch or browse our website. We also offer Click & Collect and Delivery options.
Frequently Asked Questions
How to use silicone sealant?
To use silicone sealant, prepare the area that needs to be sealed, apply the sealant, smooth the sealant, and then leave it to dry.
How much tile adhesive do I need?
You will need 1.8kgs per 1mm depth per m2.
How to mix grout?
To mix grout, add water to the grouting powder in the manufacturer-recommend ratio. Tilt mixing bucket and stir with a grout-mixing knife. Then, adjust grout consistency by adding more powder or water. Let the grout rest for up to 10 minutes before using a grout knife to mix thoroughly once more.
How to use wood filler on a door frame?
To use wood filler on a door frame, start off by scraping out any flaking and splinters of paint from the damaged parts by using a wire brush. Then, it is important to soften or mix the filler as per instructions. It could involve stirring to the point of hardening, kneading until it softens, or mixing different substances until you get a similar colour. At this point, apply the ready filler on a putty knife. You will then scrape it onto the frame’s damaged area. After you’ve done that, allow a reasonable time for the filler to dry.
How to use expanding foam?
To use expanding foam, first clean the area, removing any debris and dirt to ensure there will be no contaminants. Put on disposable gloves to ensure you stay as safe as possible (as expanding foam can burn and will stick to your skin if it gets on you), prepare the can by removing the top and screwing in the applicator nozzle onto the valve, making sure not to use too much. Then, finally, shake the can well and then insert the nozzle into the hole you wish to fill, holding the can upside down for the best application. Make sure to leave the foam to set, which will take between 30 minutes and 12 hours depending on the amount of foam you’ve used. Once the foam has dried, you can cut and sand it down to the desired fit.
What is grab adhesive used for?
Grab adhesive is used for bonding materials quickly without the need for screws or nails.
What sealant is best for waterproofing?
Silicone sealants are commonly used for waterproofing due to their flexibility and resistance to moisture.
Can sealants be used outdoors?
Yes, exterior sealants are designed to withstand weather conditions and provide long-lasting protection.