Builders Metalwork

This 90 x 90mm Angle Bracket has a wing of length of 59mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (16) 9mm (4) 11mm (1) 11x30 Slot (1). Brackets must be used...

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

This 150 x 90mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (21) 9mm (4) 11mm (1) 11x30 Slot (2) . Brackets must be...

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

Debonding sleeve for use on plain-ended wall ties at vertical movement joints. Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block. Floor fixing: Across 3 joists (perpendicular) with...

A screw-in tie supplied with a Nylon 8mm plug for joining new masonry to existing walls without the need for jointing, perfect for conservatories, extensions and garden walls. Simple and easy to install, this starter tie is suitable for use in brickwork...

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (20) 9mm (6) 11x30 Slot (2). Brackets must be used in...

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Type 3 Wall Tie designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. These Double Triangle wall ties are suitable for use in external walls of houses and small commercial...

Type 3 Wall Tie designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. These Double Triangle wall ties are suitable for use in external walls of houses and small commercial...

Type 3 Wall Tie designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. These Double Triangle wall ties are suitable for use in external walls of houses and small commercial...

Designed to fix brickwork or blockwork to timber-based structures up to a height of 15m. An example about be attaching a timber door or window frames directly to brickwork. The ties are screwed horizontally into the frame, surrounded by mortar and built...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4 series can be used with all approved robust details...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...