Builders Metalwork

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm Bed Joint Thickness and the fixing type is M8 max -...

The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm Bed Joint Thickness and the fixing type is M8 max -...

This galvanised mild steel Hip Iron is designed to provide decorative restraints to prevent ridged tile movement on hipped roofs. Where a ridge comes down at an angle, the iron is nailed to the joist before bedding the final tile, to prevent any slippage.