Angled ridge end cap to neatly finish the junction between the ridge and the verge. A ridge end cap to cover the ridge at the roof apex. Left and right handed units are no longer required as Easy Verge U is truly universal.

Angled ridge end cap to neatly finish the junction between the ridge and the verge. A ridge end cap to cover the ridge at the roof apex. Left and right handed units are no longer required as Easy Verge U is truly universal.

Cure-It Evo primer kit (when used as part of the Cure It Evo System) is more cost effective than traditional methods for applying GRP to roof areas above habitable spaces whilst allowing the final application of a topcoat. The primer can be applied...

Designed for application without the need for OSB decking boards direct to insulation boards. Basecoat is applied direct to Cure It Evo Primer to form durable waterproof laminate.

ClassicBond Lap Sealants are heavy-bodied trowel - or gunconsistency materials used in conjunction with roofing system materials. The use is to seal the exposed edges of EPDM membrane splices. Lap Sealants are extremely durable, and their cured rubber...

Primarily designed for flashing irregular pipes, penetrations, and other details, it proves ideal for versatile applications. Its flexibility allows easy moulding to irregular shapes and surfaces.

ClassicBond PS Cover Strip 152mm is a Pressure Sensitive Tape. Simplify your next ClassicBond EPDM installation with its Pressure-Sensitive Cured Cover Strip. Exhibits resistance against tearing, flex cracking, and abrasion induced by temperature...

The reinforced EPDM membrane is 152mm (6”) wide, while the adhesive strips are 76mm (3") wide. The Pressure-Sensitive Russ has the splice tape pre-applied along one edge, and can be installed horizontally or vertically in conjunction with Seam Fastening...

Anti-back up drains are one of the best means of connecting roof systems with 68mm rainwater pipes (standard domestic uk size) on flat roofs, gutter, domestic & commercial building. They have a high resistance to uv light, ozone movement and cracking.

This ClassicBond Leaf Grate for Anti Backup Drain is one of the best means of connecting roof systems with 68mm rainwater pipes (standard domestic UK size) on flat roofs, gutters, domestic & commercial buildings. This has a high resistance to UV light,...

This makes the ClassicBond EPDM Angled Roof Drain well suited for most roof applications. It can be used in conjunction with many different types of roof including EPDM rubber roofing systems. The primary use of this drain is as a wall scupper that...

The ClassicBond leaf grate is packaged with our anti-backup drains and will prevent any leaves or gravel from entering and blocking up the drain.

This 50mm Steel Hand Roller is a roofing tool used for seam rolling in metal roofing and ensuring adhesion in flat roofing applications.

The ClassicBond 50mm Russ Seam Fastening Plate is designed to seal Russ tape to the material below it and is a vital part of EPDM roofing. The plates are secured at set intervals and are coated with primer and adhesive before the membrane is placed over...

ClassicBond Sure Edge Joiner to clip into place allowing to joint two Kerb trims together.

This EPDM Gutter Edge Trim is a flat roof edge trim which provides a neat and aesthetically pleasing finish, whilst also effectively securing EPDM roofing membranes. It is durable and easy to install, suitable for both domestic and commercial...

These components make the detailing of roof perimeters fast and easy without having to make any compromise.

The Check Kerb Internal Corner makes the detailing of roof perimeters fast and easy, saving the need and time of trying to manufacture neat corners on site. Corners are either glued or fixed in position.

These components make the detailing of roof perimeters fast and easy without having to make any compromise.

These components make the detailing of roof perimeters fast and easy without having to make any compromise.

ClassicBond EPDM PS large pipe seal fits pipes 25mm to 150mm in diameter. ClassicBond pipe seals are cured, pre-moulded EPDM flashings for round flat roof penetrations, pre-applied seam tape to the base and a stainless steel clamping ring.

A high strength, solvent based contact adhesive, specifically designed and manufactured for EPDM flat roofing installations. Perfect for bonding ClassicBond EPDM membrane to horizontal and vertical surfaces. Suitable for a range of surfaces e.g. timber,...

ClassicBond SPB Aerosol Bonding Adhesive can dramatically reduce the overall time spent both on application & waiting for flash off, resulting in jobs being completed without the elements interfering. This is a high strength, solvent based bonding...

Designed for one-step cleaning and priming of surfaces prior to the application of 76mm Seam Tape , 228mm Uncured Flashing, 152mm Cover Strip, preformed pipe boots, walkway pads and all other pressure sensitive products.