The Cure It Drip Fascia Trim A250 is fitted to roof edges to allow drainage into gutter. It's compatible with C1, C2 and C4 corner trims and comes in a 3000mm length.

If you're looking to install a GRP waterproofing system, this Kit contains all the tools needed to successfully carry out the installation. The Paddle Rollers ensure that the reinforcement mat is properly saturated whilst removing air bubbles from the...

AT195 external angle trim has a high adhesion finish on the outer face for step details, gutter floors or cover flashings etc. Manufactured from aluminium extrusion with a high tensile strength and rigidity, it has an anti-corrosion coating that is UV...

AT195 internal angle trim is ideal for use in roofing applications where the internal ties are exposed to the weather. This product has a high adhesion surface on the inner face for forming upstands, gutter floors etc. This can be used with all of our...

Cure It Raised Edge Trim B230 3000mm is a cold applied, free from the risks associated with hot works, will withstand foot traffic as standard and is UV resistant. This roof trims meets all of your needs for a warm roof specification. There are no seams,...

B230 heavy duty raised edge GRP trim provides a flat edge detail to prevent water run off. The unique high-bond finish makes this trim flexible for uneven surfaces, or can be used on sloping roofs. Drip matches A170 and is available in a variety of...

The Cure It Raised Edge Trim B260 3000mm is a glass reinforced polyester roofing materials manufacturer that offers a complete range of materials specially formulated for roofing applications. These materials are cold applied- free from the risks...

Cure It B260 Heavy Duty Raised Edge Trim provides flat roof edge detail to prevent water run off. Unique high-bond finish. Designed for use with roofing resin and topcoat- no delamination. Flexible for uneven surfaces. Pre-pigmented

Cure It raised edge trim b300 is ideal for warm roof specifications. Complete range of materials specially formulated for roofing applications by the leading glass reinforced polyester roofing materials manufacturer. No seams, joints or welds. Extreme UV...

The Cure It Universal External Corner is designed to work with both the A200 and B260 profiles to form a left or right hand corner. This eliminates the need for two separate parts that may be inexperienced or untrained individuals, such as maintenance or...

The Cure It Range of lead flashings and corner trims is a complete system, designed by the leading manufacturer in glass reinforced polyester roofing materials, which has been developed to meet the needs of traditional lead flashing. With no seams,...

The Cure It Lead Flashing range is a cost effective alternative to traditional lead flashing and will withstand foot traffic as standard. The simulated long leg flashing material has been specially formulated by the leading glass reinforced polyester...

Replace traditional lead flashing with simulated lead that has the same look as the original but much greater durability.

The Cure It C11D Closure (Compatible with D260) is designed for use on expansion joints. The Cure It C11D Closure features a durable design and is compatible with E280 and all D Trims.

The Cure It range of products offers a sustainable alternative to lead flashing. Produced using glass reinforced plastic, our extensive range is designed to meet the needs of traditional lead flashing applications, including coped and ballasted roofs...

This flashing is a durable, long-lasting product that is specially formulated for roofing applications by the world leading glass reinforced polyester roofing materials manufacturer. It will withstand foot traffic as standard and possesses an extreme UV...

The Cure It C2 Fillet to Trim Corner is designed for use where a flat roof meets an abutting wall. It is compatible with all A, B and D trims. Available in both right and left corners.

Flattening the seam where a flat roof meets an abutting wall is made easy with Cure-It Fillet Right. Designed to be used in conjunction with Cure-It's A200, B260 and D260 trims, this moulding allows for a perfect 90 degree angle. Available in both left...

C3 External Corner can be used as a preformed external corner for all D trims. This avoids mitring in situ, and gives you the best quality, extremely UV resistant product possible.

The Cure It C3 Internal Fillet Corner is a preformed internal corner for all D-trims. This product avoids the need for mitered joints in situ, giving it a sleek modern appearance that complements any home.

For use with A200 and B260 trims to form a left or right hand corner.

Cure It Roof Ridge Closure is a preformed closure for use with E280 profiles. The C5 Roof Ridge Closure provides an easy-use solution for performing repair works on pitched roofs, as it can be fastened in place simply by inserting the top bar of the...

The Cure It Rolled Rib Closure is a preformed closure trim for use with ER35/40. Rolled rib joints for simulated lead appearance and unique high-bond finish are designed for use with roofing resin and topcoat- no delamination.

This pre-formed external flashing corner provides a quick and easy way to repair flashings on C100 or C150 type chimneys. The flashing has a pre-formed external corner that is ready for installation on the exterior of your building.