Check local branch stock
-
Green Paling Fence Board Treated Rough Sawn Timber UC3u Unseasoned FSC 22 x 150mm (6x1)
Discover the unparalleled versatility and sustainability of our Rough Sawn Timber UC3u Treated Green Unseasoned FSC 22 x 150mm fencing boards. Crafted from FSC certified timber, with full chain of custody, you can be assured of environmentally conscious... -
Green Paling Fence Board Treated Rough Sawn Timber UC3u Unseasoned FSC 22 x 100mm (4x1)
Discover the robustness and sustainability of our Rough Sawn Timber UC3u Treated Green Unseasoned FSC 22x100mm planks, perfect for supporting your outdoor projects. Crafted from responsibly sourced spruce/pine and fir, this timber upholds the full chain... -
Sawn Timber UC3u Treated Kiln Dried Regularised FSC 47 x 50mm (2x2)
Discover the versatility and resilience of our Rough Sawn Timber UC3u Treated Kiln Dried Regularised FSC 44x44mm (2x2). This timber is expertly treated to user classification 3 or UC3u, making it ideal for external use, providing it is used above... -
Green Paling Fence Board Treated Timber UC3u Unseasoned FSC 22 x 75mm (3x1)
UC3u Treatment Class Crafted from UC3u treated timber, these provide robust protection against rot and decay. Ideally suited for above-ground outdoor applications such as constructing pergolas and garden structures. UC3u is not recommended for a raised... -
Green Paling Fence Board Treated Rough Sawn Timber UC3u Unseasoned FSC 22 x 200mm (8x1)
UC3u Treatment Class Crafted from UC3u treated timber, these provide robust protection against rot and decay. Ideally suited for above-ground outdoor applications such as constructing pergolas and garden structures. UC3u is not recommended for a raised... -
Green Paling Fence Board Treated Timber UC3u Unseasoned FSC 22 x 225mm (9x1)
UC3u Treatment Class Crafted from UC3u treated timber, these provide robust protection against rot and decay. Ideally suited for above-ground outdoor applications such as constructing pergolas and garden structures. UC3u is not recommended for a raised... -
Rough Sawn Timber UC2 Treated Green Kiln Dried PEFC 22 x 100mm
Ungraded timber means it is neither C16 nor C24 graded, it can only be used for non-load bearing applications. This makes it ideal for general-purpose uses such as shelving, boxing-in, panelling, planters, compost bins, small tool stores, DIY joinery,... -
Rough Sawn Timber UC2 Treated Green Kiln Dried PEFC 25 x 150mm (6x1)
Ungraded timber means it is neither C16 nor C24 graded, it can only be used for non-load bearing applications. This makes it ideal for general purpose uses such as shelving, boxing-in, panelling, planters, compost bins, small tool stores, DIY joinery,... -
Rough Sawn Timber UC3u Treated Green Homegrown Softwood FSC 38 x 50mm
UC3u Treatment Class Crafted from UC3u treated timber, these provide robust protection against rot and decay. Ideally suited for above-ground outdoor applications such as constructing pergolas and garden structures. UC3u is not recommended for a raised...
Rough Sawn Timber
What is Structural Carcassing Timber?
Often referred to as carcassing timber, this type of wood is most commonly used in structural applications that involve the timber being used in an area that won’t be seen, and typically comes in three gradings:
- C16 Timber
- C24 Timber
- Part Graded Timber
Do I need Treated Structural Timber?
If the timber is going to be placed in an area where attacks from external problems such as moisture or fungal attacks, are likely to cause major problems, then we strongly recommend purchasing treated structural timber.
For all the following applications, we generally recommend using a treated structural timber:
- Roof Rafters
- Timber Framing
- Ceiling Joists
- Floor Joists
- Deck Joists
I need a Sawn Finish Structural Timber
Sawn Carcassing Timber has largely been replaced in UK stockists with “eased edge” stock being introduced in the UK in 2004.
Eased Edged means that the timber is semi-surfaced and finished to a uniform finish that is relatively smooth. Four corners are radiused to reduce the likelihood of splinters.
Most of our branches do hold stock of sawn boards that are either treated or untreated. However, if you require a sawn unsurfaced finish, please contact your nearest branch, who will be able to source this as a special item to meet your requirements. Most sizes can be obtained within 5 to 10 working days.
Confused about C16 and C24 structural timber and which grade you will need? Your nearest branch will be more than happy to help.