Power Tool Accessories

Check local branch stock

Faithfull Dep Centre Grinding Disc

WAS:

WAS:

WAS:

£1.82 - £5.37 each (Ex VAT)

WAS:

£2.18 - £6.44 each (Inc VAT)

For use with angle grinders only, in stock removal applications on stone. By presenting the disc to the workpiece at an angle of 45 degrees the most efficient results are achieved.

WAS:

WAS:

WAS:

£1.82 - £5.37 each (Ex VAT)

WAS:

£2.18 - £6.44 each (Inc VAT)
Paslode IM350+ Galv-Plus Ring Shank Nails & 3 Fuel Cells 2.8mm 3300 Pack

WAS: each

WAS:

£131.33 each (Inc VAT)

WAS: each

WAS:

£109.44 each (Ex VAT)

This squared-edged, chequered Premium Framed Trellis would make a beautiful additional to your garden. Primarily intended to install on a exterior wall or fence to create a garden feature that can support climbing plants, this trellis can be used as a...

WAS: each

WAS:

£131.33 each (Inc VAT)

WAS: each

WAS:

£109.44 each (Ex VAT)
Faithfull Stone Cut Off Wheel

WAS:

WAS:

WAS:

£1.15 - £5.54 each (Ex VAT)

WAS:

£1.38 - £6.65 each (Inc VAT)

Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90 degrees. Note: Particular attention should be paid to the relevant safety regulations when using abrasive discs

WAS:

WAS:

WAS:

£1.15 - £5.54 each (Ex VAT)

WAS:

£1.38 - £6.65 each (Inc VAT)
Paslode IM350/IM65/65A Ni-MH Battery 1.5Ah 6V (018890)

WAS: each

WAS:

£104.64 each (Inc VAT)

WAS: each

WAS:

£87.20 each (Ex VAT)

NiMH battery pack for use with older Paslode gas nailing tools.

WAS: each

WAS:

£104.64 each (Inc VAT)

WAS: each

WAS:

£87.20 each (Ex VAT)
Dart Flat Bit (Sizes available 20mm - 40mm)

WAS:

WAS:

WAS:

£3.10 - £6.18 each (Ex VAT)

WAS:

£3.72 - £7.42 each (Inc VAT)

Featuring double-sided spurs, Flat Bits are designed to creates holes that are clean, with side scoops that speedily remove wood chippings. Vibrations are reduced and the Flat Bits are ideally used in a variety of general applications including drilling...

WAS:

WAS:

WAS:

£3.10 - £6.18 each (Ex VAT)

WAS:

£3.72 - £7.42 each (Inc VAT)
Dart HSS Ground Twist Drill 2mm (2 Pack)

WAS: each

WAS:

£4.22 each (Inc VAT)

WAS: each

WAS:

£3.52 each (Ex VAT)

The DART HSS Ground Twist Drill Bit is manufactured from precision ground steel, with a 135-degree split point tip that allows for spot drilling without the need for pre-centring. The cutting edge of the bit is designed to offer both quick drilling and a...

WAS: each

WAS:

£4.22 each (Inc VAT)

WAS: each

WAS:

£3.52 each (Ex VAT)
Dart Impact Driver Bit T20 (10 Pack)

WAS: each

WAS:

£9.72 each (Inc VAT)

WAS: each

WAS:

£8.10 each (Ex VAT)

The DART Impact 25mm Driver Bit is an anti-slip impact bit that is ideal for general screw driving applications, particularly those that are difficult to work with. They have a longer length than most standard bits.

WAS: each

WAS:

£9.72 each (Inc VAT)

WAS: each

WAS:

£8.10 each (Ex VAT)
Dart Impact Driver Bits 50mm PZ2 (10 Pack)

WAS: each

WAS:

£12.28 each (Inc VAT)

WAS: each

WAS:

£10.23 each (Ex VAT)

This pack contains 10 DART PZ2 50mm Impact Driver Bits that have a longer length than standard driver bits, are anti-slip and are an ideal choice if you are looking for something that can be used in difficult applications.

WAS: each

WAS:

£12.28 each (Inc VAT)

WAS: each

WAS:

£10.23 each (Ex VAT)
Dart Angle Driver

WAS: each

WAS:

£55.00 each (Inc VAT)

WAS: each

WAS:

£45.83 each (Ex VAT)

The DART Angle Driver is a right angle 25mm driver that includes a magnetic bit holder and has a head that can rotate 360 degrees. This allows the tool to tighten or loosen various types of fixings such as screws that are in difficult-to-reach areas.

WAS: each

WAS:

£55.00 each (Inc VAT)

WAS: each

WAS:

£45.83 each (Ex VAT)
Dart Angle Driver Bit Set (31 Piece)

WAS: each

WAS:

£105.65 each (Inc VAT)

WAS: each

WAS:

£88.04 each (Ex VAT)

The DART 31 Piece Angle Driver Bit Set contains a right angle 25mm driver that has a head that can rotate 360 degrees, making it the ideal choice for working in awkward areas with restricted space. The driver has a handle that is adjustable to 0, 45- and...

WAS: each

WAS:

£105.65 each (Inc VAT)

WAS: each

WAS:

£88.04 each (Ex VAT)
Dart Auger Bit 100mm

WAS:

WAS:

WAS:

£7.30 - £19.49 each (Ex VAT)

WAS:

£8.76 - £23.39 each (Inc VAT)

The DART 20 x 100mm Auger Bit is a unique corkscrew style drill bit that is capable of drilling into wood quickly as well as removing the waste chip quickly and efficiently. It can be used on both hard and soft woods that are wet or dry, as well as...

WAS:

WAS:

WAS:

£7.30 - £19.49 each (Ex VAT)

WAS:

£8.76 - £23.39 each (Inc VAT)
Dart Auger Bit 230mm

WAS:

WAS:

WAS:

£10.37 - £26.95 each (Ex VAT)

WAS:

£12.44 - £32.34 each (Inc VAT)

Auger Bits are precision ground, creating a drill bit that can be used in both soft and hard timbers that are either wet or dry with fast, clean drilling abilities. The threaded tip ensures that the bit self-centres whilst the smooth flute helps to...

WAS:

WAS:

WAS:

£10.37 - £26.95 each (Ex VAT)

WAS:

£12.44 - £32.34 each (Inc VAT)
Dart Auger Bit Set 230mm (6 Piece)

WAS: each

WAS:

£55.97 each (Inc VAT)

WAS: each

WAS:

£46.64 each (Ex VAT)

The DART 6-Piece 230mm Auger Bit Set contains 6 of the most popular sizes of the unique corkscrew style drill bit (13mm, 16mm, 18mm, 20mm, 22mm and 25mm) that can be used to bore holes into most types of wood, including soft and hard wood that is either...

WAS: each

WAS:

£55.97 each (Inc VAT)

WAS: each

WAS:

£46.64 each (Ex VAT)
Dart Fibre Cement Cutting Jigsaw Blade T141HM (3 Pack)

WAS: each

WAS:

£27.78 each (Inc VAT)

WAS: each

WAS:

£23.15 each (Ex VAT)

The DART Fibre Cement Cutting Jigsaw Blade offers a straight cut into a variety of materials, including fibre cement, plasterboard and porous concrete that is no more than 80mm thick. It can also be used on glass fibre that is reinforced with...

WAS: each

WAS:

£27.78 each (Inc VAT)

WAS: each

WAS:

£23.15 each (Ex VAT)
Dart Flat Bit Set (6 Piece)

WAS: each

WAS:

£19.69 each (Inc VAT)

WAS: each

WAS:

£16.41 each (Ex VAT)

The DART 6-Piece Flat Bit Set contains six Flat Bits that all include double side spurs that allow cutting that is both quick and exact. The flat bits are suitable for a range of uses including cutting through plastic, plasterboard and wood. Each bit is...

WAS: each

WAS:

£19.69 each (Inc VAT)

WAS: each

WAS:

£16.41 each (Ex VAT)
Dart Flat Bit Set (8 Piece)

WAS: each

WAS:

£21.65 each (Inc VAT)

WAS: each

WAS:

£18.04 each (Ex VAT)

The DART 8 Piece Flat Bit Set contains eight Flat Bits in the following sizes: 10mm, 12mm, 16mm, 18mm, 20mm, 25mm, 32mm and 38mm. Each Flat Bit is precision engineered and features double side spurs that help ensure cutting is quick and precise. They can...

WAS: each

WAS:

£21.65 each (Inc VAT)

WAS: each

WAS:

£18.04 each (Ex VAT)
Dart Four Wing Auger Set (6 Piece)

WAS: each

WAS:

£73.76 each (Inc VAT)

WAS: each

WAS:

£61.47 each (Ex VAT)

The DART 6-piece 4 Wing Auger Set features six bits of varying sizes that can be used to drill into wood with a smooth, fast cut. Wings ensure faster chip ejection, and a threaded tip assists with self-centering and self-feeding. The pieces are supplied...

WAS: each

WAS:

£73.76 each (Inc VAT)

WAS: each

WAS:

£61.47 each (Ex VAT)
Dart Gold ATB +5 Wood Saw Blade 160Dmm x 20B x 48Z

WAS: each

WAS:

£34.42 each (Inc VAT)

WAS: each

WAS:

£28.68 each (Ex VAT)

The DART Gold ATB Wood Saw Blade is a high-quality product that is designed to be used by the professional tradesman. It features Alternate Top Bevel (ATB) teeth and has a unique gold coating that ensures the blade is wear-resistant, whilst creating low...

WAS: each

WAS:

£34.42 each (Inc VAT)

WAS: each

WAS:

£28.68 each (Ex VAT)
Dart HSS Ground Twist Drill Set

WAS:

WAS:

WAS:

£30.38 - £62.63 each (Ex VAT)

WAS:

£36.46 - £75.16 each (Inc VAT)

The DART HSS Ground Twist Drill Set contains high-speed steel drill bits, supplied in a handy case to keep them clean and allow for easy transportation. Each drill bit has its own labelled slot to help with easy identification. Suitable for a wide range...

WAS:

WAS:

WAS:

£30.38 - £62.63 each (Ex VAT)

WAS:

£36.46 - £75.16 each (Inc VAT)
Dart Impact Driver Bit PH1 (10 Pack)

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)

The DART 25mm Impact Driver Bit is an anti-slip impact bit that is ideal for general screw driving applications, particularly those that are difficult to work with. They have a longer length than most standard bits.

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)
Dart Impact Driver Bit PH1 50mm (10 Pack)

WAS: each

WAS:

£12.28 each (Inc VAT)

WAS: each

WAS:

£10.23 each (Ex VAT)

The DART Impact Driver Bit is suitable for use in general screw driving applications, particularly those that are difficult. The driver bits are anti-slip.

WAS: each

WAS:

£12.28 each (Inc VAT)

WAS: each

WAS:

£10.23 each (Ex VAT)
Dart Impact Driver Bit PH2 (10 Pack)

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)

This pack contains x10 25mm DART PH2 Impact Driver Bits that are ideal for driving fasteners into a variety of tough materials including metal, plastic and wood.

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)
Dart Impact Driver Bit PH3 (10 Pack)

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)

This DART 25mm Impact Driver Bit is an anti-slip impact bit that is ideal for general screw driving applications, particularly those that are difficult to work with. They have a longer length than most standard bits.

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)
Dart Impact Driver Bit PZ1 (10 Pack)

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)

This pack contains x10 25mm DART PZ1 Impact Driver Bits that are suitable for use with heavy-duty projects and is designed to handle the high power of impact drivers.

WAS: each

WAS:

£8.03 each (Inc VAT)

WAS: each

WAS:

£6.69 each (Ex VAT)

Items 1 to 24 of 107 total

Power Tool Accessories come in a variety of different shapes and sizes depending on the purpose of the job in hand. Compatible with all our power tool range, we stock drill bits, tool accessory kits and jigsaw blades for use on any material.

If you are unsure what type of tool accessory you require, our experienced team at your local branch can assist to ensure your work is completed easily and in the most efficient manner.

Frequently Asked Questions

How to sharpen drill bits?

To sharpen drill bits, start by examining it, making sure to examine the whole cutting edge, right to the outer edge. Then, since you may be using a grinder or belt sander, consider wearing a lot of PPE, such as goggles and gloves. Now that you have everything ready, it’s time to grind the drill tip. Turn on the bench grinder and hold the cutting edge precisely parallel to the front of the grinding wheel. Slowly, carefully, move the bit until it contacts the wheel. Do not turn or rotate it, simply keep it straight and held at a 60-degree angle. Hold it against the wheel for no more than four to five seconds. When satisfied with the point on the first side, turn the drill bit 180 degrees and use the same process for the opposite side of the tip. Once you’re confident in the sharpness of the bit, insert it into your drill and begin drilling. It should ‘bite’ the wood right away with minimal pressure.

What size drill bit for brick?

You will need a 10 or 12mm masonry drill bit for drilling through brick.

What size drill bit for wall plug?

For a yellow wall plug, the smallest wall plug you can buy, you will need a 5mm drill bit and a 4-8 size screw. For a red wall plug, one of the more medium sized wall plugs, you will need a 6mm drill bit and a 6-10 screw size. For a brown wall plug, which is a heavier wall plug, you will need a 7mm drill bit and a 10-14 screw size. For a blue wall plug, the biggest wall plug you can buy, you will need a 10mm drill bit and a 14-18 screw size.

Which drill bit for wood?

Auger drill bit

Which drill bit for metal?

Titanium drill bit

Which drill bit for concrete?

Shank hammer drill bit

Which drill bit for plastic?

Spur-point bits