Builders Metalwork

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

Various fixing holes for convenience, 3.75 x 30mm Square Twisted Sherardized / Galvanised Nails or M6 threaded fasteners. The fixing holes on this fixing band are 6.25 / 3.8mm. This product is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...