JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of the carrying joist or wrapped over the top for higher...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...