Builders Metalwork

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...

Various fixing holes for convenience, 3.75 x 30mm Square Twisted Sherardized / Galvanised Nails or M6 threaded fasteners. The fixing holes on this fixing band are 6.25 / 3.8mm. This product is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015...

The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm Bed Joint Thickness and the fixing type is M8 max -...

The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm Bed Joint Thickness and the fixing type is M8 max -...

The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm Bed Joint Thickness and the fixing type is M8 max -...

This galvanised mild steel Hip Iron is designed to provide decorative restraints to prevent ridged tile movement on hipped roofs. Where a ridge comes down at an angle, the iron is nailed to the joist before bedding the final tile, to prevent any slippage.

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...