Check local branch stock
-
![SPHS.jpg.jpeg]( "SPHS.jpg.jpeg")
![2_SPHS.jpg.jpeg]( "2_SPHS.jpg.jpeg")
Expamet Masonry Single Piece Joist Hanger 225 x 100mm (SPSH225100)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against... -
![SPHS.jpg.jpeg]( "SPHS.jpg.jpeg")
![2_SPHS.jpg.jpeg]( "2_SPHS.jpg.jpeg")
Expamet Masonry Single Piece Joist Hanger 225 x 150mm (SPSH225150)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against... -
![SPHS.jpg.jpeg]( "SPHS.jpg.jpeg")
![2_SPHS.jpg.jpeg]( "2_SPHS.jpg.jpeg")
Expamet Masonry Single Piece Joist Hanger 225 x 47mm (SPSH22547)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against... -
![SEFC50H-1000x1000.jpg.jpeg]( "SEFC50H-1000x1000.jpg.jpeg")
![SEFC%20dims.jpg.jpeg]( "SEFC%20dims.jpg.jpeg")
Expamet Safe End Frame Cramp 150 x 50mm (SEFCSEFC200)
The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm... -
![SEFC50H-1000x1000.jpg.jpeg]( "SEFC50H-1000x1000.jpg.jpeg")
![SEFC%20dims.jpg.jpeg]( "SEFC%20dims.jpg.jpeg")
Expamet Safe End Frame Cramp 200 x 50mm (SEFC250)
The Powertie Safe End Frame Cramp Wall Ties that is made from Stainless Steel 1.4301 to BS EN10088-2:2014 and tested to European standard BS EN845-1:2013+A1:2016. This product is for use with 10-12mm... -
![HIP.jpg.jpeg]( "HIP.jpg.jpeg")
![2_HIP.jpg.jpeg]( "2_HIP.jpg.jpeg")
Expamet Scrolled Hip Irons 300 x 25 x 3mm (HIP3003)
This galvanised mild steel Hip Iron is designed to provide decorative restraints to prevent ridged tile movement on hipped roofs. Where a ridge comes down at an angle, the iron is nailed to the joist... -
![Speedy%20Minor.jpg.jpeg]( "Speedy%20Minor.jpg.jpeg")
![SM-1000x860.jpg.jpeg]( "SM-1000x860.jpg.jpeg")
Expamet Speedy Minor Face Fixed Joist Hanger 50mm (SM50)
This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a... -
![ST.jpg.jpeg]( "ST.jpg.jpeg")
Expamet Standard Leg Joist Hanger 125mm (ST125)
A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger... -
![ST.jpg.jpeg]( "ST.jpg.jpeg")
Expamet Standard Leg Joist Hanger 38mm (ST38)
A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger... -
![ST.jpg.jpeg]( "ST.jpg.jpeg")
Expamet Standard Leg Joist Hanger 44mm (ST44)
A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger... -
![ST.jpg.jpeg]( "ST.jpg.jpeg")
Expamet Standard Leg Joist Hanger 50mm (ST50)
A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger... -
Protektor Galvanised Steel Eco C-Stud Profile 2400 x 50 x 36mm (5949/24)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 2400 x 70 x 36mm (5971-24)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 3000 x 50 x 36mm (5949-30)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 3000 x 70 x 36mm (5971-30)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 3000 x 90 x 36mm (5991-30)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 3600 x 50 x 36mm (5949/36)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 3600 x 70 x 36mm (5971-36)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel Eco C-Stud Profile 3600 x 90 x 36mm (5991-36)
Protektor Eco C-Stud partition profiles are a low-cost, high quality, friction fit solution for use in forming a strong rigid support frame for non-load bearing plasterboard partitions. A lightweight... -
Protektor Galvanised Steel U-Wall Standard Track Profile 3000 x 52 x 50mm (5851)
A lightweight U-shaped, track profile made from galvanised steel, used for wall junctions, ceilings and floors between a partition. Manufactured to the highest possible quality, the track profiles... -
Protektor Galvanised Steel U-Wall Standard Track Profile 3000 x 72 x 50mm (5872)
A lightweight U-shaped, track profile made from galvanised steel, used for wall junctions, ceilings and floors between a partition. Manufactured to the highest possible quality, the track profiles... -
Protektor Galvanised Steel U-Wall Standard Track Profile 3000 x 92 x 50mm (5892)
A lightweight U-shaped, track profile made from galvanised steel, used for wall junctions, ceilings and floors between a partition. Manufactured to the highest possible quality, the track profiles... -
Protektor MF5 Ceiling Furring Channel Top 3600 x 47 x 26mm (PP5)
A cost effective furring channel. Manufactured from galvanised steel, this hat shaped profile suitable for use in suspended ceiling application. Commonly used for furring out interior or exterior... -
Protektor MF7 Ceiling Primary Profile 3600 x 12 x 45mm (PP7)
Protektor galvanised steel Primary Profiles are suitable for use in suspended ceiling application. Used internally in commercial and domestic applications, this primary profile is versatile and...
Builders Metalwork
Our range of builders metalwork products provide reinforcement for strong structural support. Timber connector plates give added strength to timber joints, and pre-drilled nail plates connect timbers on both sides.
