Builders Metalwork

A screw-in tie supplied with a Nylon 8mm plug for joining new masonry to existing walls without the need for jointing, perfect for conservatories, extensions and garden walls. Simple and easy to...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh...

AB1006060 is a light duty L Shape Angle bracket timber connections. Fixing type is suitable for substrate and 5mm (20) 11mm (3) hole size. Brackets must be used in pairs to prevent eccentric...

This galvanised Heavy Duty (horizontal) Restraint Strap features a 100mm Bent piece. 6mm fixing hole dimensions to suite 4 x 75mm round wire nails. Build in with downstand tight against face of block...

All nail holes must be filled, Nail plates should be used on both sides of the joint to prevent eccentric loading. Ensure plate is located cenrally over joint. Fixing type is 3.75 x 30mm Square...

This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement...

This light duty Expamet Angle bracket is a thin L shape bracket for timber connections. Fixing type is suitable for substrate and hole size. Countersunk to give fixings a flush finish

The H and L straps are designed to The Building Regulations for horizontal and vertical restraint. Heavy restraint straps meet requirements for lateral restraint of roof trusses, rafters and joists...

JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of...

JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of...

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm...

This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against...

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4...

Various fixing holes for convenience, 3.75 x 30mm Square Twisted Sherardized / Galvanised Nails or M6 threaded fasteners. The fixing holes on this fixing band are 6.25 / 3.8mm. This product is made...

JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of...

Wall ties must meet the acoustic performance requirements of Type A as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon...

Suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall tie for a 50mm, 75mm, 100mm, 125mm or 150mm cavity. The HRT4...

Wall ties must meet the acoustic performance requirements of Type A as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon...

The UKs most popular solution to the tying-in of new walls to existing masonry walls/columns. The only system with snap out ties which can be positioned anywhere along the channel for a universal fit...

Manufactured from cement that has been reinforced with glass fibre, the Mesh Spacer Triple Cover is designed to offer the same levels of strength and durability as concrete. The Spacer should be used...

All nail holes must be filled, Nail plates should be used on both sides of the joint to prevent eccentric loading. Ensure plate is located cenrally over joint. Fixing type is 3.75 x 30mm Square...