Check local branch stock
-
Expamet Speedy Minor Face Fixed Joist Hanger 47mm (SM47)
This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x... -
Expamet Standard Leg Joist Hanger 47mm (ST47RT)
A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed... -
Expamet Speedy Minor Face Fixed Joist Hanger 38mm (SM38)
This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75 x... -
Expamet Standard Leg Joist Hanger 75mm (ST75)
A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed... -
Expamet Long Leg Speedy Joist Hanger 100mm (LLS100)
Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to... -
Expamet Long Leg Speedy Joist Hanger 150mm (LLS150)
Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to... -
Expamet Long Leg Speedy Joist Hanger 47mm (LLS47)
Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to... -
Expamet Long Leg Speedy Joist Hanger 50mm (LLS50)
Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to... -
Expamet Long Leg Speedy Joist Hanger 75mm (LLS75RT)
Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to... -
Expamet Masonry Single Piece Joist Hanger 100 x 47mm (SPSH10047)
This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 100 x 75mm (SPSH10075)
This Single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 125 x 47mm (SPSH12547)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 125 x 75mm (SPSH12575)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 150 x 100mm (SPSH150100)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 150 x 47mm (SPSH15047)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 150 x 50mm (SPSH15050)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 150 x 75mm (SPSH15075)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 175 x 100mm (SPSH175100)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 175 x 47mm (SPSH17547)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 175 x 75mm (SPSH17575)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 200 x 100mm (SPSH200100)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 200 x 47mm (SPSH20047)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 200 x 75mm (SPSH20075)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not... -
Expamet Masonry Single Piece Joist Hanger 225 x 100mm (SPSH225100)
This single piece joist hanger from Expamet is to be built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist. Back of hanger must be tight against wall. Joists are to be cut square with a gap not...
Joist Brackets
Whether you need heavy-duty joist hangers or a medium-duty option like speedy joist hangers with standard legs, Howarth Timber offers a wide range available to order online for home delivery or click and collect from your local branch.
Choosing the right joist hanger and installing it correctly is essential for the durability and strength of your construction projects, whether you’re a professional or a DIY enthusiast.
How to use joist hangers
Joist hangers are vital for supporting wooden beams in projects like flooring and decking. They secure the joist to the main structure, providing stability and reducing movement - especially in weight-bearing projects.
When using joist brackets, choose the correct type for your project’s load-bearing requirements and ensure your fasteners are compatible with the hanger material.
Do I need joist hangers?
Joist hangers are recommended for reinforcing joints in projects where support is critical. They’re particularly useful in decking, flooring, and roofing, where joists require secure attachment.
While not all projects need joist brackets, using them can improve stability and extend lifespan, especially in high-traffic or load-bearing areas. If you’re unsure, consult a professional to make the best choice for safety and durability.
How do you install joist hangers?
Correct installation of joist hangers is crucial for strong structural support.
Start by measuring and marking where each joist will sit. Position the joist hanger on the support beam, securing it with nails or screws as recommended for the hanger type. Fit the joist into the hanger, ensuring it sits flush, then fasten it securely. This prevents unnecessary movement and wear over time.
How to attach joist hangers
Attaching joist hangers requires precision. Select the right joist bracket for your joist size and type, position it level on the beam, and secure it with recommended nails or screws. Check alignment carefully to prevent stress on the structure. This ensures your joists are properly supported and securely connected.
Explore our range of joist hangers to find the right solution for your project. With options for heavy-duty, standard, and specialised applications, Howarth Timber makes it simple to find the perfect hanger - whether for a small DIY project or a large-scale construction job.