Builders Metalwork

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The red Staifix Universal Insulation Retaining Clip (Uni) will fit all the standard stainless steel ties including HRT4 and RT2, in order to retain insulation to the inner leaf of the cavity wall.

Staifix Wire Balloons are a simple and effective way of keeping chimneys and downpipes clear from nesting birds, leaves and other debris. Available in a few sizes, wire balloons are manufactured from stainless steel or galvanised steel mesh and are...

Staifix Wire Balloons are a simple and effective way of keeping chimneys and downpipes clear from nesting birds, leaves and other debris. Available in a few sizes, wire balloons are manufactured from stainless steel or galvanised steel mesh and are...

Staifix Wire Balloons are a simple and effective way of keeping chimneys and downpipes clear from nesting birds, leaves and other debris. Available in a few sizes, wire balloons are manufactured from stainless steel or galvanised steel mesh and are...

AB1006060 is a light duty L Shape Angle bracket timber connections. Fixing type is suitable for substrate and 5mm (20) 11mm (3) hole size. Brackets must be used in pairs to prevent eccentric loading. Use 4.0x40 Annular Ring Shank Nails to achieve...

AB12512542 is a light duty L shape Expamet Angle bracket for timber connections. Fixing type is suitable for substrate and 4mm (16) hole size. Brackets must be used in pairs to prevent eccentric loading.

This light duty AB15015063 Expamet Angle bracket is a thin L shape bracket for timber connections. Fixing type is suitable for substrate and hole size using products for 4mm (20) 9mm (6) 11x30 Slot (2) fixing hole dimensions. Brackets must be used in...

Light duty 150mm long by 90mm tall Expamet Angle bracket is a thin L shape bracket for timber connections. Fixing type is suitable for substrate and hole size, hole sizes are 4mm (21) 9mm (4) 11mm (1) 11x30 Slot (2) for convenience. Brackets must be used...

This light duty Expamet Angle bracket AB404040 is an L shape bracket that is 40mm tall, wide, and long and is used for timber connections. Use 4.0x40 Annular Ring Shank Nails to achieve stated loads, otherwise as suitable for substrate and hole size. ...

This light duty Expamet Angle bracket is a thin L shape bracket for timber connections. Fixing type is suitable for substrate and hole size. Countersunk to give fixings a flush finish

AB804042 is a light duty Expamet Angle bracket that is L shaped for timber connections. Fixing type is suitable for substrate and hole size. Various fixing holes sizes for convenience

Expamet Angle bracket AB906059 is a L shape bracket for timber connections. Fixing type is suitable for substrate and hole size, with the fixing dimension being 4mm (12) 9mm (4) 11x30 Slot (1).

The Expamet angle braket is a timber connector that is suitable for substrate and hole size fixing type. The fixing hole dimensions 4mm (16) 9mm (4) 11mm (1) 11x30 Slot (1). Brackets must be used in pairs to prevent eccentric loading

All nail holes must be filled, Nail plates should be used on both sides of the joint to prevent eccentric loading. Ensure plate is located cenrally over joint. Fixing type is 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails.