null

Power Tool Accessories

Power tool accessories includes products like drill bits, tool accessory sets and jigsaw blades. A wide range of sizes in stock.

Filters

Check local branch stock

  • Faithfull Stone Cut Off Wheel Faithfull Stone Cut Off Wheel

    Faithfull Stone Cut Off Wheel

    £1.15 - £5.54 each (Ex VAT)
    £1.38 - £6.65 each (Inc VAT)
    Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90 degrees. Note: Particular attention should be paid to the relevant safety regulations when using abrasive discs
    £1.15 - £5.54 each (Ex VAT)
    £1.38 - £6.65 each (Inc VAT)
  • Faithfull Dep Centre Grinding Disc

    Faithfull Dep Centre Grinding Disc

    £1.82 - £5.37 each (Ex VAT)
    £2.18 - £6.44 each (Inc VAT)
    For use with angle grinders only, in stock removal applications on stone. By presenting the disc to the workpiece at an angle of 45 degrees the most efficient results are achieved.
    £1.82 - £5.37 each (Ex VAT)
    £2.18 - £6.44 each (Inc VAT)
  • Mixing Paddle Mixing Paddle

    Mixing Paddle

    £7.89 - £12.41 each (Ex VAT)
    £9.47 - £14.89 each (Inc VAT)
    Mixing paddles have a robust construction for heavy-duty work. It is great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Are used with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.
    £7.89 - £12.41 each (Ex VAT)
    £9.47 - £14.89 each (Inc VAT)

  • Dart Auger Bit 100mm

    £7.30 - £19.49 each (Ex VAT)
    £8.76 - £23.39 each (Inc VAT)
    The DART 20 x 100mm Auger Bit is a unique corkscrew style drill bit that is capable of drilling into wood quickly as well as removing the waste chip quickly and efficiently. It can be used on both hard and soft woods that are wet or dry, as well as...
    £7.30 - £19.49 each (Ex VAT)
    £8.76 - £23.39 each (Inc VAT)

  • Dart Premium Holesaw Kit

    £55.83 - £60.05 each (Ex VAT)
    £67.00 - £72.06 each (Inc VAT)
    The DART Premium Holesaw Kit features seven holesaw attachments that are of varying size. Each holesaw offers a smooth cutting action that is suitable for cutting a range of materials including wood, cast iron, steel, stainless steel, plastic, aluminium...
    £55.83 - £60.05 each (Ex VAT)
    £67.00 - £72.06 each (Inc VAT)

  • Dart Tile & Glass Drill

    £3.09 - £5.25 each (Ex VAT)
    £3.71 - £6.30 each (Inc VAT)
    The DART Tile/Glass Drill is suitable for use in most portable drills, however it is best if you use the bit at a low rpm (revolution per minute).
    £3.09 - £5.25 each (Ex VAT)
    £3.71 - £6.30 each (Inc VAT)
  • Dart HSS Ground Twist Drill Set

    Dart HSS Ground Twist Drill Set

    £30.38 - £62.63 each (Ex VAT)
    £36.46 - £75.16 each (Inc VAT)
    The DART HSS Ground Twist Drill Set contains high-speed steel drill bits, supplied in a handy case to keep them clean and allow for easy transportation. Each drill bit has its own labelled slot to help with easy identification. Suitable for a wide range...
    £30.38 - £62.63 each (Ex VAT)
    £36.46 - £75.16 each (Inc VAT)

  • Dart Auger Bit 230mm

    £10.37 - £26.95 each (Ex VAT)
    £12.44 - £32.34 each (Inc VAT)
    Auger Bits are precision ground, creating a drill bit that can be used in both soft and hard timbers that are either wet or dry with fast, clean drilling abilities. The threaded tip ensures that the bit self-centres whilst the smooth flute helps to...
    £10.37 - £26.95 each (Ex VAT)
    £12.44 - £32.34 each (Inc VAT)
  • Dart Flat Bit (Sizes available 20mm - 40mm)

    Dart Flat Bit (Sizes available 20mm - 40mm)

    £3.10 - £6.18 each (Ex VAT)
    £3.72 - £7.42 each (Inc VAT)
    Featuring double-sided spurs, Flat Bits are designed to creates holes that are clean, with side scoops that speedily remove wood chippings. Vibrations are reduced and the Flat Bits are ideally used in a variety of general applications including drilling...
    £3.10 - £6.18 each (Ex VAT)
    £3.72 - £7.42 each (Inc VAT)
  • Paslode IM350+ Galv-Plus Ring Shank Nails & 3 Fuel Cells 2.8mm 3300 Pack

    Paslode IM350+ Galv-Plus Ring Shank Nails & 3 Fuel Cells 2.8mm 3300 Pack

    This squared-edged, chequered Premium Framed Trellis would make a beautiful additional to your garden. Primarily intended to install on a exterior wall or fence to create a garden feature that can support climbing plants, this trellis can be used as a...
  • Paslode F16 ElectroGalv Class 1 Angled Brads Nails (IM65A) 16 Gauge 2 Fuel Cells 2000 Pack

    Paslode F16 ElectroGalv Class 1 Angled Brads Nails (IM65A) 16 Gauge 2 Fuel Cells 2000 Pack

    £31.43 - £40.03 each (Ex VAT)
    £37.72 - £48.04 each (Inc VAT)
    The Paslode F16 nail and fuel pack is perfect to use on the IM65A nail gun. It features the stronger, stiffer 16 gauge nails to ensure consistent drivability. The 16 gauge size also creates a smaller hole to provide excellent finishing to ensure a flush...
    £31.43 - £40.03 each (Ex VAT)
    £37.72 - £48.04 each (Inc VAT)

Power Tool Accessories

Power Tool Accessories come in a variety of different shapes and sizes depending on the purpose of the job in hand. Compatible with all our power tool range, we stock drill bits, tool accessory kits and jigsaw blades for use on any material.

If you are unsure what type of tool accessory you require, our experienced team at your local branch can assist to ensure your work is completed easily and in the most efficient manner.

Frequently Asked Questions

How to sharpen drill bits?
To sharpen drill bits, start by examining it, making sure to examine the whole cutting edge, right to the outer edge. Then, since you may be using a grinder or belt sander, consider wearing a lot of PPE, such as goggles and gloves. Now that you have everything ready, it’s time to grind the drill tip. Turn on the bench grinder and hold the cutting edge precisely parallel to the front of the grinding wheel. Slowly, carefully, move the bit until it contacts the wheel. Do not turn or rotate it, simply keep it straight and held at a 60-degree angle. Hold it against the wheel for no more than four to five seconds. When satisfied with the point on the first side, turn the drill bit 180 degrees and use the same process for the opposite side of the tip. Once you’re confident in the sharpness of the bit, insert it into your drill and begin drilling. It should ‘bite’ the wood right away with minimal pressure.
What size drill bit for brick?
You will need a 10 or 12mm masonry drill bit for drilling through brick.
What size drill bit for wall plug?
For a yellow wall plug, the smallest wall plug you can buy, you will need a 5mm drill bit and a 4-8 size screw. For a red wall plug, one of the more medium sized wall plugs, you will need a 6mm drill bit and a 6-10 screw size. For a brown wall plug, which is a heavier wall plug, you will need a 7mm drill bit and a 10-14 screw size. For a blue wall plug, the biggest wall plug you can buy, you will need a 10mm drill bit and a 14-18 screw size.
Which drill bit for wood?
Auger drill bit
Which drill bit for metal?
Titanium drill bit
Which drill bit for concrete?
Shank hammer drill bit
Which drill bit for plastic?
Spur-point bits

Newsletter Sign Up