Power Tool Accessories

Check local branch stock

Faithfull Dep Centre Grinding Disc

WAS:

WAS:

WAS:

£1.82 - £5.37 each (Ex VAT)

WAS:

£2.18 - £6.44 each (Inc VAT)

For use with angle grinders only, in stock removal applications on stone. By presenting the disc to the workpiece at an angle of 45 degrees the most efficient results are achieved.

WAS:

WAS:

WAS:

£1.82 - £5.37 each (Ex VAT)

WAS:

£2.18 - £6.44 each (Inc VAT)
Paslode IM350+ Galv-Plus Ring Shank Nails & 3 Fuel Cells 2.8mm 3300 Pack

WAS: each

WAS:

£131.33 each (Inc VAT)

WAS: each

WAS:

£109.44 each (Ex VAT)

This squared-edged, chequered Premium Framed Trellis would make a beautiful additional to your garden. Primarily intended to install on a exterior wall or fence to create a garden feature that can support climbing plants, this trellis can be used as a...

WAS: each

WAS:

£131.33 each (Inc VAT)

WAS: each

WAS:

£109.44 each (Ex VAT)
Paslode IM350/IM65/65A Ni-MH Battery 1.5Ah 6V (018890)

WAS: each

WAS:

£104.64 each (Inc VAT)

WAS: each

WAS:

£87.20 each (Ex VAT)

NiMH battery pack for use with older Paslode gas nailing tools.

WAS: each

WAS:

£104.64 each (Inc VAT)

WAS: each

WAS:

£87.20 each (Ex VAT)
Faithfull Stone Cut Off Wheel

WAS:

WAS:

WAS:

£1.15 - £5.54 each (Ex VAT)

WAS:

£1.38 - £6.65 each (Inc VAT)

Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90 degrees. Note: Particular attention should be paid to the relevant safety regulations when using abrasive discs

WAS:

WAS:

WAS:

£1.15 - £5.54 each (Ex VAT)

WAS:

£1.38 - £6.65 each (Inc VAT)
Timco FirmaHold Collated Brad Nails Angled Galvanised 16 Gauge

WAS:

WAS:

WAS:

£6.90 - £10.80 per box (Ex VAT)

WAS:

£8.28 - £12.96 per box (Inc VAT)

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

WAS:

WAS:

WAS:

£6.90 - £10.80 per box (Ex VAT)

WAS:

£8.28 - £12.96 per box (Inc VAT)
Dart Impact Driver Bit T20 (10 Pack)

WAS: each

WAS:

£9.72 each (Inc VAT)

WAS: each

WAS:

£8.10 each (Ex VAT)

The DART Impact 25mm Driver Bit is an anti-slip impact bit that is ideal for general screw driving applications, particularly those that are difficult to work with. They have a longer length than most standard bits.

WAS: each

WAS:

£9.72 each (Inc VAT)

WAS: each

WAS:

£8.10 each (Ex VAT)
Dart Impact Driver Bits 50mm PZ2 (10 Pack)

WAS: each

WAS:

£12.28 each (Inc VAT)

WAS: each

WAS:

£10.23 each (Ex VAT)

This pack contains 10 DART PZ2 50mm Impact Driver Bits that have a longer length than standard driver bits, are anti-slip and are an ideal choice if you are looking for something that can be used in difficult applications.

WAS: each

WAS:

£12.28 each (Inc VAT)

WAS: each

WAS:

£10.23 each (Ex VAT)
Dart HSS Ground Twist Drill 2mm (2 Pack)

WAS: each

WAS:

£4.22 each (Inc VAT)

WAS: each

WAS:

£3.52 each (Ex VAT)

The DART HSS Ground Twist Drill Bit is manufactured from precision ground steel, with a 135-degree split point tip that allows for spot drilling without the need for pre-centring. The cutting edge of the bit is designed to offer both quick drilling and a...

WAS: each

WAS:

£4.22 each (Inc VAT)

WAS: each

WAS:

£3.52 each (Ex VAT)
Dart Flat Bit (Sizes available 20mm - 40mm)

WAS:

WAS:

WAS:

£3.10 - £6.18 each (Ex VAT)

WAS:

£3.72 - £7.42 each (Inc VAT)

Featuring double-sided spurs, Flat Bits are designed to creates holes that are clean, with side scoops that speedily remove wood chippings. Vibrations are reduced and the Flat Bits are ideally used in a variety of general applications including drilling...

WAS:

WAS:

WAS:

£3.10 - £6.18 each (Ex VAT)

WAS:

£3.72 - £7.42 each (Inc VAT)
Dart Flat Bit (20mm - 40mm)

WAS:

WAS:

WAS:

£2.35 - £3.10 each (Ex VAT)

WAS:

£2.82 - £3.72 each (Inc VAT)

Featuring double-sided spurs, Flat Bits are designed to creates holes that are clean, with side scoops that speedily remove wood chippings. Vibrations are reduced and the Flat Bits are ideally used in a variety of general applications including drilling...

WAS:

WAS:

WAS:

£2.35 - £3.10 each (Ex VAT)

WAS:

£2.82 - £3.72 each (Inc VAT)
Paslode IM350+ Class 2 D-Head Smooth Nails 90 x 3.1mm 2 Fuel Cells 2200 Pack (141234)

WAS: each

WAS:

£130.28 each (Inc VAT)

WAS: each

WAS:

£108.57 each (Ex VAT)

A Paslode 90 x 3.1mm Galv-Plus Nail Fuel Pack for use with the Paslode IM350+ Framing Nailer. This pack contains 2,200 90x3.1mm galvanised smooth nails and two fuel cells. This product is perfect for First Fix applications like Timber Frame. This handy...

WAS: each

WAS:

£130.28 each (Inc VAT)

WAS: each

WAS:

£108.57 each (Ex VAT)
Paslode IM350+ Galv-Plus Class 2 D-Head Ring Shank Nails 1100 Pack 1 Fuel Cell

WAS:

WAS:

WAS:

£38.53 - £41.83 each (Ex VAT)

WAS:

£46.24 - £50.20 each (Inc VAT)

Paslode nail and fuel pack for IM350+ comes with D-Head nail heads that are Service Class 2. Class 2 nails mean they can be operated both internally in a non-heated environment and externally but in protected area. These versatile Galv-Plus handy pack of...

WAS:

WAS:

WAS:

£38.53 - £41.83 each (Ex VAT)

WAS:

£46.24 - £50.20 each (Inc VAT)
Paslode IM350+ Galv-Plus Class 2 D-Head Ring Shank Nails

WAS:

WAS:

WAS:

£85.50 - £101.50 each (Ex VAT)

WAS:

£102.60 - £121.80 each (Inc VAT)

Paslode nail and fuel pack for Paslode IM350+ nailer gun. This service class 2 nails are designed for Internal use not heated, and outdoor use protected. This nail fastener size of 63mm is perfect for Roof Battening, whereas the 75mm fastener lengths are...

WAS:

WAS:

WAS:

£85.50 - £101.50 each (Ex VAT)

WAS:

£102.60 - £121.80 each (Inc VAT)
Red Ten Ultra Wetdry Diamond Porcelain Drill Set 5pc (74100-1)

WAS: per pack

WAS:

£229.63 per pack (Inc VAT)

WAS: per pack

WAS:

£191.36 per pack (Ex VAT)

The DART 5 Piece Diamond Porcelain Drill Set is of the finest quality, providing exceptional performance and durability. Very hard tiles, porcelain, ceramic, marble, glass, slate, and stone are all suitable.

WAS: per pack

WAS:

£229.63 per pack (Inc VAT)

WAS: per pack

WAS:

£191.36 per pack (Ex VAT)
OX Trade Permanent Line Marker Spray Yellow 750ml (OX-T022601)

WAS: each

WAS:

£7.02 each (Inc VAT)

WAS: each

WAS:

£5.85 each (Ex VAT)

The OX 750ML Permanent Line Marker Spray (Yellow) is suitable for all road marking systems. It boasts both high colour pigment and fast drying action. If you would like anymore information on these products then please contact our helpful customer...

WAS: each

WAS:

£7.02 each (Inc VAT)

WAS: each

WAS:

£5.85 each (Ex VAT)
OX Trade Permanent Line Marker Spray Blue 750ml (OX-T022602)

WAS: each

WAS:

£7.02 each (Inc VAT)

WAS: each

WAS:

£5.85 each (Ex VAT)

The OX 750ML Permanent Line Marker Spray (Blue) is suitable for all road marking systems. It boasts both high colour pigment and fast drying action. If you would like anymore information on these products then please contact our helpful customer service...

WAS: each

WAS:

£7.02 each (Inc VAT)

WAS: each

WAS:

£5.85 each (Ex VAT)
OX Trade Permanent Line Marker Spray White 750ml (OX-T022603)

WAS: each

WAS:

£7.02 each (Inc VAT)

WAS: each

WAS:

£5.85 each (Ex VAT)

The OX 750ML Permanent Line Marker Spray (White) is suitable for all road marking systems. It boasts both high colour pigment and fast drying action. If you would like anymore information on these products then please contact our helpful customer service...

WAS: each

WAS:

£7.02 each (Inc VAT)

WAS: each

WAS:

£5.85 each (Ex VAT)
Faithfull Metal Dep Centre Grinding Disc 115 x 22 x 6mm

WAS: each

WAS:

£2.14 each (Inc VAT)

WAS: each

WAS:

£1.78 each (Ex VAT)

For use with angle grinders only, in stock removal applications on ferrous and non -ferrous metal. By presenting the disc to the workpiece at an angle of 45 degrees the most effecient results are achieved.

WAS: each

WAS:

£2.14 each (Inc VAT)

WAS: each

WAS:

£1.78 each (Ex VAT)
OX Pro One Shot Oil 100ml (OX-P189301)

WAS: each

WAS:

£2.70 each (Inc VAT)

WAS: each

WAS:

£2.25 each (Ex VAT)

The OX 100ml One Shot Oil is a semi-synthetic two-stroke oil one shot. This all-in one-lubrication answers all the needs of modern static two-stroke engines. It comes with an attractive display box packaging that holds 25 pieces. If you would like...

WAS: each

WAS:

£2.70 each (Inc VAT)

WAS: each

WAS:

£2.25 each (Ex VAT)
Wetdry Diamond Porcelain Drill Pack

WAS: each

WAS:

£40.25 each (Inc VAT)

WAS: each

WAS:

£33.54 each (Ex VAT)

A one-of-a-kind tool that requires no drill guide, little coolant, and quick, easy waste ejection, allowing for continuous multiple hole cutting. High-quality exposed diamond for quick, smooth cutting. Excellent performance with both corded and cordless...

WAS: each

WAS:

£40.25 each (Inc VAT)

WAS: each

WAS:

£33.54 each (Ex VAT)
Dart Red Ten Ultra Wetdry Diamond Porcelain Drill Pack

WAS:

WAS:

WAS:

£33.00 - £83.85 each (Ex VAT)

WAS:

£39.60 - £100.62 each (Inc VAT)

A one-of-a-kind tool that requires no drill guide, little coolant, and quick, easy waste ejection, allowing for continuous multiple hole cutting. High-quality exposed diamond for quick, smooth cutting. Excellent performance with both corded and cordless...

WAS:

WAS:

WAS:

£33.00 - £83.85 each (Ex VAT)

WAS:

£39.60 - £100.62 each (Inc VAT)
Faithfull Tungsten Carbide One Flute Router Bit 4 x 11mm 1/4in Shank (FAIRB21)

WAS: each

WAS:

£6.92 each (Inc VAT)

WAS: each

WAS:

£5.77 each (Ex VAT)

The Faithfull router cutter tip is made from a tungsten carbide which is then brazed onto a steel body. The tool is designed to cut a wide variety of timber and abrasive material such as MDF and plywood. Suitable for use by all professional tradesmen,...

WAS: each

WAS:

£6.92 each (Inc VAT)

WAS: each

WAS:

£5.77 each (Ex VAT)
Paslode IM350+ Galv-Plus Class 2 D-Head Ring Shank Nails 2.8mm 3 Fuel Cells 3300 Pack

WAS:

WAS:

WAS:

£110.59 - £122.31 each (Ex VAT)

WAS:

£132.71 - £146.77 each (Inc VAT)

This product is compatible with the IM350+ nail guns and is the ideal size for use with the 1st application Floorboarding for internal use. 350 fuel cells: As gas cools it condenses down it dispenses less fuel (heat with body heat to warm).

WAS:

WAS:

WAS:

£110.59 - £122.31 each (Ex VAT)

WAS:

£132.71 - £146.77 each (Inc VAT)
Paslode 360Xi Bright Class 1 RounDrive Ring Shank Nails 2.8mm 3 Fuel Cells 3300 Pack

WAS:

WAS:

WAS:

£87.10 - £90.74 each (Ex VAT)

WAS:

£104.52 - £108.89 each (Inc VAT)

These Paslode class 1 nails offer optimum performance with a quality finish. Service Class 1 means that they're designed for indoor use, with close boarding applications. This handy pack contain 3 fuel cells and a massive 3,300 nails, meaning you won't...

WAS:

WAS:

WAS:

£87.10 - £90.74 each (Ex VAT)

WAS:

£104.52 - £108.89 each (Inc VAT)

Items 97 to 108 of 108 total

Power Tool Accessories come in a variety of different shapes and sizes depending on the purpose of the job in hand. Compatible with all our power tool range, we stock drill bits, tool accessory kits and jigsaw blades for use on any material.

If you are unsure what type of tool accessory you require, our experienced team at your local branch can assist to ensure your work is completed easily and in the most efficient manner.

Frequently Asked Questions

How to sharpen drill bits?

To sharpen drill bits, start by examining it, making sure to examine the whole cutting edge, right to the outer edge. Then, since you may be using a grinder or belt sander, consider wearing a lot of PPE, such as goggles and gloves. Now that you have everything ready, it’s time to grind the drill tip. Turn on the bench grinder and hold the cutting edge precisely parallel to the front of the grinding wheel. Slowly, carefully, move the bit until it contacts the wheel. Do not turn or rotate it, simply keep it straight and held at a 60-degree angle. Hold it against the wheel for no more than four to five seconds. When satisfied with the point on the first side, turn the drill bit 180 degrees and use the same process for the opposite side of the tip. Once you’re confident in the sharpness of the bit, insert it into your drill and begin drilling. It should ‘bite’ the wood right away with minimal pressure.

What size drill bit for brick?

You will need a 10 or 12mm masonry drill bit for drilling through brick.

What size drill bit for wall plug?

For a yellow wall plug, the smallest wall plug you can buy, you will need a 5mm drill bit and a 4-8 size screw. For a red wall plug, one of the more medium sized wall plugs, you will need a 6mm drill bit and a 6-10 screw size. For a brown wall plug, which is a heavier wall plug, you will need a 7mm drill bit and a 10-14 screw size. For a blue wall plug, the biggest wall plug you can buy, you will need a 10mm drill bit and a 14-18 screw size.

Which drill bit for wood?

Auger drill bit

Which drill bit for metal?

Titanium drill bit

Which drill bit for concrete?

Shank hammer drill bit

Which drill bit for plastic?

Spur-point bits