Everbuild PinkGrip SF 'But It's White' C4 380ml PINKWE

Pinkgrip SF But It's White is a solvent free, white version of the brand leading Pinkgrip Direct Bond Adhesive. It has all the unique benefits of Pinkgrip and will stick just about anything on a building site without the need for under pinning, thanks to the products no-slump formula. This product is great for Bonding dado rails, architrave’s and skirting. Fixing wall cladding direct to internal wall surfaces or timber battens. Fixing battens directly onto walls without fastenings. Bonding carpet gripper systems to most floors without the need for nails or tacks. Bonding stair nosing to concrete or wooden stairs. Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans. The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet. Use mechanical abrasion to clean porous surfaces if necessary before application. Apply EVERBUILD® PINKGRIP® SF BUT IT'S WHITE to one side either in strips or daubs (or by trowel for low viscocity grade). Position the object to be fixed, then move from side to side and simultaneously apply pressure to achieve an even bond. If the object is wrongly positioned, slide it to the correct position. Finally, apply maximum pressure for a short time (up to 1 minute). Wipe away any excess with a damp cloth making a neat joint between the two bonded surfaces. Temporary mechanical fixings may be required for heavy objects while full bond strength is reached.