Palio Core Genna Herringbone Vinyl Flooring 596 x 149 x 6.5mm 1.954m2 (SM-RCP6550)

Palio Core is designed for quick and easy installation over uneven sub-floors. Using a familiar patented click-locking system combined with a rigid core LVT construction, Palio Core allows you to create an authentic, luxurious feel in no time at all, even when installing over existing floors such as ceramic tiles or wooden planks. Presenting pinky-red tones and a characterful elm design, Genna creates a distinctive floor with plenty of natural warmth. Laid ultra-modern herringbone pattern, the smaller (596mm x 149mm) planks highlight the wavy grain patterns and create a heightened sense of movement. Genna is also available in a (1220mm x 179mm) full length plank design. Colour matched scotia available. The collection includes desirable herringbone planks, marble and travertine stone designs to choose from with each design available with a 100% colour matched scotia to ensure a seamless finish. A preferred alternative to laminate flooring that delivers an unbeatable floor finish. This product should be installed with a minimum expansion gap of 3/16” (5 mm) around the perimeter of the room and all fixed objects, including pipes. This minimum must be increased to 5/16” (8 mm) for areas larger than 1000 sq. ft./100 m² (consult your supplier for larger areas**). Note the minimum expansion gap is defined as the smallest gap between product and static fixture, that can be measured at ANY point around the perimeter. In order to allow for thermal expansion, door frames should either be undercut, or an expansion gap left. Skirting/base boards should either be removed or undercut. Alternatively, a suitable edge trim should be used to cover the expansion gap. This product should be installed with staggered joints.